Skip to the story
Wed, Nov 18Subscribe

Tata Electronics to Spend $5-6 Bn on Dholera Fab Equipment

Tata Electronics will spend $5-6 Bn on equipment for its Dholera chip fab, about half the project cost. It wants Indian suppliers in the chain.

By

5 min read

Tata Electronics Dholera chip fab equipment beside a semiconductor wafer and manufacturing machinery Copy
Tata Electronics plans $5 Bn to $6 Bn in equipment spending for its Gujarat wafer fabrication facility, with commercial output targeted for mid-2028. Illustration: StartupFeed. Copy

Quick Take

  • Tata Electronics will spend $5 Bn to $6 Bn on equipment for its Dholera chip fab, close to half the $11 Bn project cost.
  • The chip supply chain already runs to more than 1,100 suppliers, over 500 construction partners and more than 6,000 pieces of equipment.
  • Commercial output at Dholera has moved to mid-2028, two years later than the December 2026 date set in 2024.
In this story4 sections

Tata Electronics will spend $5 Bn to $6 Bn on equipment for its chip fab at Dholera in Gujarat, Srinivas Satya said on November 17.

That is close to half the $11 Bn the plant will cost. Satya runs the components business and the supply chain at Tata Electronics. He set out the numbers at the Bengaluru Tech Summit.

Dholera is running late. At the March 2024 groundbreaking, IT minister Ashwini Vaishnaw said the first chip would come in December 2026. He has since put commercial output at mid-2028.

Equipment Takes Almost Half of the $11 Bn Dholera Bill

The Dholera fab sits on 163 acres and is designed for 50,000 wafers a month. India approved it at Rs 91,000 crore in February 2024.

Tools are the biggest line. Each piece of equipment costs $1 Mn to $3 Mn. Running the plant will cost about $500 Mn a year once it is going.

The AI plan is not new. Dholera was billed as an AI-enabled fab at the 2024 groundbreaking. The presentation at the summit put the gain from AI at 5% on yield and 5% on tool uptime.

The fab is a joint effort by Tata Electronics and Powerchip Semiconductor Manufacturing Corporation of Taiwan. The two completed the technology transfer deal in September 2024.

Moving the kit is its own job. The chip supply chain involves more than 6,000 pieces of equipment and over 70 cross-border movements.

Tata Electronics Counts More Than 1,100 Suppliers

More than 1,100 suppliers now work on the chip business at Tata Electronics. Over 500 construction partners are on the two sites.

Satya said the chip industry is one globally connected supply chain. India still has to build its own skills in equipment, materials, services and engineering. He put it this way:

“We have to look at collaboration and bringing in the right partners”

Srinivas Satya, president, components business and chief supply chain officer, Tata Electronics. From his address at the Bengaluru Tech Summit, November 17, 2026.

The number of slots is not small. At Semicon India in 2025, Satya said India needs another 50 to 100 companies in the chain, beyond the top 10 to 12 equipment makers.

Small Indian engineering firms have already been brought into Tata Electronics factories to build parts. That model will now be used for chip making, where the machines and the steps are far harder.

The components side gives a record to point to. One component plant raised output 200 times between 2022 and 2026. That plant employs about 30,000 people.

The Fab Needs 5,000 Engineers India Does Not Yet Have

The two plants need more than 5,000 engineers and technicians between them. The plan covers about 15 engineering roles and 12 shop floor job families.

More than 300 engineers have already trained at PSMC’s fab in Taiwan. Young engineers go for up to six months of work on the floor.

Satya said India has deep talent but a real gap remains. The gap is between what engineers can do now and what a chip plant needs. He called it manageable rather than fatal.

Experts are coming in from about 14 to 15 countries. Construction workers are being trained with IIT Bombay, IIT Gandhinagar, IIT Guwahati, L&T and Gati Shakti Vishwavidyalaya.

Universities are also in the plan, to build skills Tata Electronics cannot simply hire.

The Assam Plant Is Further Along Than Dholera

Jagiroad in Assam is ahead of Dholera. The first cleanroom there is working and pilot chip runs started in October 2026.

Commercial output at Jagiroad is expected around December 2026 or January 2027. The plant sits on 173 acres and is built for 48 million chips a day.

SiteDholera, GujaratJagiroad, Assam
What it doesWafer fabAssembly and test
Approved investmentRs 91,000 CrRs 27,000 Cr
Land163 acres173 acres
Capacity50,000 wafers a month48 Mn chips a day
StatusStill buildingPilot runs started
Output expectedMid-2028December 2026 or January 2027

One of the two main production buildings at Jagiroad is finished. Work on the second has started.

Dholera is the bigger and slower job. Equipment is only starting to move in, and the building work is not finished.

The order of the two plants matters for buyers. Packaging and testing can run on chips made elsewhere, so Jagiroad does not have to wait for Dholera.

Supply deals signed through 2026 cover both sites. Partners include Nexperia, Sumitomo Chemical, Fujifilm and L&T Semiconductor.

What this means for you

If you run an Indian equipment, materials or engineering services firm, Tata Electronics has a $5 Bn to $6 Bn order book to fill. Start supplier qualification now, because tools move into Dholera through 2027 and the window closes before mid-2028.

StartupFeed Insight

The number to watch is not $11 Bn. It is the share of $5 Bn to $6 Bn in tools that an Indian company actually builds or services. Right now that share is small. Fab tools come from a handful of firms in the Netherlands, Japan and the United States. What Indian firms can win first is the layer around the tools: gas lines, cleanroom fit-out, spares and service deals. Watch the Dholera tool installation plan through 2027. If Tata Electronics has not named a first Indian tool supplier by December 2027, the local chain is still a plan.

By Saraswati Chaubey, Writer

Have a tip? Write to us at editorial@startupfeed.in.

Get featured

Tell your startup story

Raised funds, launched a product or hit a milestone? Pitch it to our editors in about three minutes.

Pitch your story
  • ₹0 to pitch
  • Every pitch reviewed
  • Picked on news merit alone
Menu
StartupFeed InsiderSign in

Sections

Funding & DealsAI & Deep-TechFintechD2C & E-CommerceSpace & DefencePolicyFor FoundersSuccess StoriesEvents

Tools

Latest newsKnow Your IncubatorsKnow Your InvestorsGet FeaturedAbout UsContact Us